UK
Europe
Netherlands
Gold
Gold
""
Instrument
RD Mathis
R.D. Mathis Resistively heated evaporation sources are made from high purity, refractory metals which have high melting points and low vapour pressures.
Instrument
Feedthroughs
CeramTec feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation. In addition to remaining leak-free in high and ultra-high vacuum, many of Ceramaseal® feedthroughs can accommodate: • High temperatures • Cryogenic temperatures • High pressure • Aggressive chemicals
Instrument
Multipin Connectors
CeramTec multipin connector category of products describes hermetic feedthroughs of two or more conducting pins that accept plugs on the air side. Some connectors allow for plugs on the vacuum side too. Product variations include Sub D (MIL-C-24308) type and circular connector types MIL-C-26482 and MIL-C-5015.
Instrument
Coaxials
CeramTec coaxial connectors consist of two concentric conductors: a central conductor surrounded by and insulated from a second tubular conductor. The outside conductor is usually at ground potential but in some product variations may be floated off ground by employing an additional insulating ring. The outer conducting surface can prevent radio frequency noise from passing to or from the central conductor.
Instrument
Thermocouples
CeramTec thermocouple feedthroughs, manufactured with thermocouple materials or compensating material, transmit through the wall of the chamber the electromotive force (emf) generated by the application of heat to the thermocouple bead without introducing error.
Instrument
Isolators
CeramTec electrical isolators, sometimes referred to as ‘breaks’ or ‘envelopes’ consist of metal sleeves brazed to each end of an insulating ceramic tube. These assemblies provide electrical isolation of system components that operate within a common environment. They can also be used to act as a conduit to introduce gases or liquids into hermetic systems.
Instrument
Viewports
CeramTec precision-engineered viewports are available with a choice of two viewport materials: sapphire or fused silica. Other viewport materials are available upon request.
Instrument
Pressure
CeramTec pressure feedthroughs are terminated in NPT (National Pipe Thread) fittings or other threaded fittings to allow for easy bulkhead installation. The NPT pressure units are designed to be sealed using Teflon tape or other acceptable sealants. All other designs use an o-ring seal.
Instrument
Accessories
Accessories is the product classification given by CeramTec for miscellaneous hardware that is used to connect, terminate, install or isolate Ceramaseal® products.
Instrument
Deposition Controllers
A deposition controller allows rate control of your deposition process using a QCM sensor. From the most basic to the most feature laden, INFICON offers a deposition controller to meet your needs.
Instrument
Deposition Monitors
A deposition monitor is similar to a deposition controller, but simpler for applications where no rate control or complex system integration is needed.